Simply Prime Primer 17kg

• Creates the essential adhesion bond between bedding and the paving element
• For small scale paved areas in; sandstone, granite, concrete, and porcelain paving units
• Polymer and resin-free
• Provides full BS 7533 compliance

Application 

1. Prepare equipment
2. Wash underside of paving units
3. Add 1 L of clean water per sachet to tub
4. Add the sachet to tub and mix
5. Brush apply 1-2mm thick coat to the paving unit
6. Place the primed paving unit on bedding

Do NOT allow simply prime Utility to dry, apply immediately prior to placing paving unit.

Simply Prime Utility is applied with a stiff brush to the entire underside of each individual paving unit.

Note - For commercial use, 2mm application will provide 6.5m2 coverage. For domestic use, 1mm application will provide 13m2 coverage.